仔细学习学习
请问,如何
“压缩包解压得到一个VMDK和一个PAT 将VMDK上传到ESX存储空间待用”
新手第一次用ESX啊,谢谢
准备在PC机上也做一回
來學習的.
学习一下了
哇!口水直流啊!谢ka !
不知道虚拟机里怎么搞,看看教程,谢谢咯
来学习,先标记一下。
回复看看啊
启动虚拟机 用DSAssistant连接
我的DSAssistant无法发现啊~~不知道哪里错了
{:3_53:} 感谢楼主分享!
神马东西。。。看看先
谢谢分享。。。
实在不太懂虚拟机神马的,学习一下。
您好,我看了您的帖子,跟你学习在ESXi里边安装群辉,但是出现了问题,DS没法找到NAS,请问,能帮忙看看么?谢谢!
After some hours of hacking I now have fully working ESXi 5.1 virtual machine setup with DS 4.2 (3202).
To get PVSCSI and VMXNET3 working a new kernel needs to be compiled. To make matters worse, scsi drives are not supported at all. So some steps need to be done:
scsi disk support must be added to drivers/scsi/sd.c so that they are marked as SYNO_DISK_SATA instead of SYNO_DISK_UNKNOWN
disks must be marked as system disks so that the md will autodetect the system raid partition (gd->systemDisk = 1)
having ata as well as scsi disks will not work. quick workaround is to disable sata support from the kernel. this has the added benefit of hiding the boot disk partitions
if sata is disabled some important symbols are not compiled in and synobios.ko module will not load, causing scemd to halt the system
implement dummy synobios kernel module that keeps scemd happy
Performance seems to be excellent, quite possibly due to paravirtualized drivers. S.M.A.R.T. is not working, but that was expected.
Some things are still in todo-list:
compile in open-vm-tools to keep esxi from nagging about installing tools
clean up kernel from unneeded device drivers, also clean modules from hd image
try to get scemd not to constantly poll SYNOIO_SET_DISK_LED and SYNOIO_GET_EUNIT_TYPE
investigate if using stock kernel is possible with dummy synobios and CONFIG_EXT4_FS_SYNO_ACL
求翻译啊
就是出现这个情况,请帮忙看看,是到底怎么回事
虚拟机配置如上
Thanks thanks
{:3_46:}{:3_47:}{:3_46:}
感谢分享,回复看看