学院 › 黑群晖 › 让diy的群辉更安静，更省电：群晖CPU频率动态调整。

火力压制 发表于 2013-12-19 11:07:15

好好学习一下

topguy 发表于 2013-12-19 11:11:23

很高深，，，学习了

AXN5 发表于 2013-12-20 16:53:45

我的是1037U，完全照著操作就可以了，中間記得要重啟一次。
多謝神人。
如果可以在DSM的系統資訊顯示CPU目前的時脈就更好了。。。

下面是操作結果提供參考：

/usr/syno/etc/rc.d$ cpufreq-info
cpufrequtils 006: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 1.80 GHz
available frequency steps: 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
available cpufreq governors: conservative, powersave, performance, ondemand, userspace
current policy: frequency should be within 800 MHz and 1.80 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
current CPU frequency is 800 MHz (asserted by call to hardware).
cpufreq stats: 1.80 GHz:44.77%, 1.70 GHz:0.00%, 1.60 GHz:0.13%, 1.50 GHz:0.03%, 1.40 GHz:0.00%, 1.30 GHz:0.03%, 1.20 GHz:0.05%, 1.10 GHz:0.13%, 1000 MHz:0.13%, 900 MHz:0.11%, 800 MHz:54.61%(76)
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 1.80 GHz
available frequency steps: 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
available cpufreq governors: conservative, powersave, performance, ondemand, userspace
current policy: frequency should be within 800 MHz and 1.80 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
current CPU frequency is 800 MHz (asserted by call to hardware).
cpufreq stats: 1.80 GHz:47.59%, 1.70 GHz:0.03%, 1.60 GHz:0.67%, 1.50 GHz:0.00%, 1.40 GHz:0.13%, 1.30 GHz:0.00%, 1.20 GHz:0.59%, 1.10 GHz:0.24%, 1000 MHz:0.00%, 900 MHz:0.00%, 800 MHz:50.74%(70)

zhqchang 发表于 2013-12-21 14:29:51

学习，学习，学习，学习，

hawie 发表于 2013-12-21 15:12:18

这个必须的。。。。。。。

hawie 发表于 2013-12-21 17:47:09

可惜不支持E350

ImRuYi 发表于 2013-12-21 18:23:51

学习了，谢谢！

MYPCHUT 发表于 2013-12-21 22:58:50

谢谢分享。

linuxsn 发表于 2013-12-23 07:17:55

怎么做呢，来看看

laoniu100 发表于 2013-12-23 08:46:59

这个厉害，学习了

hongmy 发表于 2013-12-23 09:09:46

关注ing。。。。

nikio 发表于 2013-12-23 10:40:58

e 这个可以y0u

hmilyzhang 发表于 2013-12-23 11:13:18

学习一下~~~~~~

pbfly 发表于 2013-12-23 11:52:47

学习一下。。。。。。。。。。。

ffert 发表于 2013-12-23 12:43:48

学习 啦

yun1990314 发表于 2013-12-23 12:48:31

看看卡

yun1990314 发表于 2013-12-23 12:48:50

看看卡

mu228 发表于 2013-12-23 13:08:16

怎么看动态？

laoniu100 发表于 2013-12-23 14:35:06

不会linux，还差那个开机自动运行不会弄

luojia2114 发表于 2013-12-23 15:28:01

改天在电脑上试一下，感谢分享

查看完整版本: 让diy的群辉更安静，更省电：群晖CPU频率动态调整。