关于淘宝2块处理相框，已收货 附图

哇，你这么快收到货 ，我的还在运输中。。。。。。唉，可恶的韵达！

还有，黄色的电池是好的，蓝色方块那种电池都是坏的

其实算起来的话，我可能是第一个发现的吧，不过我想收到之后再发贴，没想到有人提起了，看起来这个版本有现成的

不好意思 ，是我发的，你发了的话，我就不发啦，呵呵，想想看，2块钱要10个也是一个2.4的价钱呀，不要白不要，反正是做试验的嘛。看了你拆的机子，看起来还不错的说。我的明天可能才到。

插入linux下，看一下lsusb就知道能不能破解了。
Bus 001 Device 004: ID 1908:0102 GEMBIRD
必须1908:0102才有戏。

本帖最后由 dsqa 于 2014-5-18 17:20 编辑

看着质量还行。。。刚才没看清。。。。

等你研究出来了，给大家写个教程啊……   我也买了10个

另外这个看着是nand的存储，呵呵。。。

1403:0001 Sitronix Digital Photo Frame
http://forum.doozan.com/read.php?9,2435

原来是更老的ST2205的啊。
只要不是AX203和AX2003的就好

期待你的作业

期待楼主测试结果，如果可以也入几个

o大，请问下SGNAS> /usr/local/bin/lcd4linux -f /usr/share/lcd4linux/theme128/my.conf
security error: group or other have access to '/usr/share/lcd4linux/theme128/my.conf'
Error reading configuration. Exit! 这个是什么问题啊？

wufError reading configuration  

读取配置文件失败 ，请确认配置文件位置

配置文件权限需要设置为600

chmod 600 /usr/share/lcd4linux/theme128/my.conf 可以了。

本帖最后由 fh_xz 于 2014-5-18 20:14 编辑

郁闷啊，破麒麟 挂载不到 相框 能推荐一个linux系统么，能挂载的

SGNAS> dmesg | grep usb
[   11.473806] usbcore: registered new interface driver usbfs
[   11.474975] usbcore: registered new interface driver hub
[   11.476937] usbcore: registered new interface driver ethub
[   11.478624] usbcore: registered new device driver usb
[   15.908711] usbcore: registered new interface driver usb-storage
[   15.928583] usbcore: registered new interface driver usblp
[   15.984418] usbcore: registered new interface driver usbhid
[   15.984420] usbhid: USB HID core driver
[   16.029523] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[   16.164786] usbcore: registered new interface driver usbserial
[   16.290411] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[   16.426717] drivers/usb/core/hub.c (2154) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0
[   16.511430] usb 1-1.2: new full-speed USB device number 3 using ehci_hcd
[   16.711365] usb 1-1.3: new high-speed USB device number 4 using ehci_hcd
[   16.815255] scsi6 : usb-storage 1-1.3:1.0
[   16.898283] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[   17.090241] usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
[   17.185590] usb 2-1.5: config 1 interface 0 altsetting 0 bulk endpoint 0x82 has invalid maxpacket 1024
[   17.269158] usb 2-1.6: new high-speed USB device number 4 using ehci_hcd
[   17.656424] usbcore: registered new interface driver usbserial_generic
[   17.656426] usbserial: USB Serial Driver core
[   17.684675] usb 1-1.4: pl2303 converter now attached to ttyUSB0
[   17.685240] usbcore: registered new interface driver pl2303
[   17.820173] syno_disk_type_get: disk driver 'usb-storage'
[   17.976395] dvb-usb: found a 'DVB-C 3221 USB2.0' in warm state.
[   17.985728] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   18.023031] dvb-usb: MAC address: 00:e0:4c:00:27:17
[   18.031651] dvb-usb: DVB-C 3221 USB2.0 successfully initialized and connected.
[   18.033046] usbcore: registered new interface driver dw2102
[   34.514858] usbcore: registered new interface driver snd-usb-audio
[   34.559101] snd_usb_hiface: Unknown symbol __snd_printk (err 0)
[   48.556746] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input2
[   48.557069] usbcore: registered new interface driver uvcvideo
[ 2457.916740] usb 1-1.2: USB disconnect, device number 3
[ 2458.615889] usb 1-1.2: new full-speed USB device number 6 using ehci_hcd
[ 2486.835461] usb 1-1.2: USB disconnect, device number 6
[ 2487.022785] usb 1-1.2: new full-speed USB device number 7 using ehci_hcd
[ 2487.507527] usb 1-1.2: device not accepting address 7, error -32
[ 2490.092788] usb 1-1.2: new full-speed USB device number 9 using ehci_hcd
[ 2495.723084] usb 1-1.2: new full-speed USB device number 10 using ehci_hcd
[ 2505.817854] generic-usb 0003:1908:3318.0001: timeout initializing reports
[ 2505.818339] generic-usb 0003:1908:3318.0001: hiddev0: USB HID v2.01 Device [BUILDWIN BL206v1.0.0] on usb-0000:00:1a.0-1.2/input0
[ 2520.104516] usb 1-1.2: USB disconnect, device number 10
[ 2522.082637] usb 1-1.2: new full-speed USB device number 11 using ehci_hcd
[ 2568.256837] usb 3-4: new full-speed USB device number 2 using xhci_hcd
SGNAS>
但是可以显示了。

我看了 文章，这款要破解需要 挂载拿到挂载的分区，但是这个看不到，没办法破解